|
 |
 |
|
| |
• LED : Super Bright Top View 3 in 1 SMD type Diode
• LED VIEW ANGLE : 120°
• MODULE : CONSISTS 30 LEDS(3 LED/10 SEGMENT)
• LED PITCH : 33.33±0.5mm
• LENGTH OF ONE REEL PCB : 500mm ( 0.5M )/ 500mm ×10( 5M )
• PCB : CAN BE CUT TO SEGMENT BY SEGMENT
• LENGTH OF SEGMENT : 3 LED/ 50mm
• PER REEL : 5 METERS LONG WITH 3M DOUBLE SIDE ADHESIVE
• PACKAGE : 5 METERS/REEL/ALUMINUM BAG |
| |
| Applications |
• BACK LIGHT
• FLEXIBLE CHANNEL LIGHT
• BORDER MARKER
• INDIRECT ILLUMINATION |
| |
Feature |
As flexible as it can be bent at any length or anywhere and can be cut or connected every three LEDs, which allows users to install it according to shapes and desired length. Red, Green and Blue emitting color can be separately controlled and many color change patterns are available with the control of LED dimmers. |
| |
Color |
Red |
Green |
Blue |
Wavelength |
620-635 |
520-525 |
465-475 |
50% Power Angle (2θ1/2) |
120° |
120° |
120° |
Intensity (mcd) |
500 |
1300 |
300 |
Lumen (lm) |
600 |
Power Consumption |
36W per reel, 0.72 per segment |
Operating Voltage |
DC12V |
Current |
3A |
Dimension |
L x W x H = 5000 x 10 x 2(mm) |
Diode Number per Reel |
150pcs |
Working Temperature |
-20 °C ~ 50 °C |
Storage Temperature |
-20 °C ~ 50 °C |
Weight |
100g per reel |
IP Rating |
IP65 with cutting ends potted |
|
| |
|
 Controller |
Model |
Working Voltage |
DC12V |
Output Load Current |
9A Reel x 3 (RGB) |
Self Power Consumption |
< 1W |
Output Power |
1 ~ 300W |
Speed Level |
8 level |
Brightness Level |
0 ~ 8 level |
Case Dimension |
L211 X W40 x H30(mm) |
Working Temperature |
-10 °C ~ 50 °C |
Packing Size |
L218 x W 45 x H50 (mm) |
Interface Type |
Terminal Interface |
Weight |
200g |
Short Circuit |
Self Protection |
|
| |
| Feature |
( 1.) 2 types of the dimmer are soft button key-press manual type and remote control.
( 2.) Remote Control distance is 50 meters from the Lighting Object to the Dimmer.
( 3.) Maximum distance is 100 meters in the opened space without any other object barrier between the
dimmer and the lighting object.
( 4.) Three lines for RGB can be controlled the maximum output current of 9A for each line.
( 5.) 10 modes of color change, strobe and color washing.
( 6.) Gray scale is 256 level.
( 7.) Each mode is 1 ~ 8 level of speed and 0 ~ 8 level of each single color controlled that is included the
RGB mixed white.
( 8.) Pause button holds the present color and speed. |
| |
|
OPERATION OF THE REMOTE CONTROL |
Keys on Dimmer |
MODE |
PAUSE |
SPD + |
SPD - |
BRI + |
BRI - |
Keys on Remote Controller |
1 |
2 |
3 |
4 |
5 |
6 |
|
| |
| Note |
( 1.) Mode: This is for the selection of color or speed playing mode. There are 10 kinds of modes pre-
programmed in the processor. 10 pre-programmed modes can play random.
( 2.) Pause: This holds the current color or speed. 2nd time of pressing this key will return to the modes
selectable.
( 3.)
SPD+/SPD-: Speed + can fasten the strobe speed; Speed – can slow down the strobe speed. The
default speed is Level 1. This is the fastest speed.
( 4.)
BRI+/BRI-: This is the dimmer to control the brightness higher or lower. The default brightness is when
the controller is powered on that is also the highest level of the brightness.
( 5.)
Auto Save: After setting each mode, the controller will save the setting automatically. When power off
and
power on again, it plays the programs last set. |
| |
| CAUTION |
( 1.) All the soft keys on the Controller or Remote Controller are sensitive, please do not use any sharp
object to pork the soft keys. This is included the PDA pen touch.
( 2.)
Please do not drop the devices on the floor or ground. Devices are not anti-shocked. |
| |
| |
| List of the Lighting Effect |
Mode |
Lighting Effects |
Remarks |
1 |
RG Flashing |
|
2 |
GB Flashing |
|
3 |
RB Flashing |
|
4 |
Seven Color Flashing |
|
5 |
RG Fading |
|
6 |
GB Fading |
|
7 |
RB Fading |
|
8 |
RGB Fading |
|
9 |
Seven Color Brightness Fad in or Fad Out |
|
10 |
Auto Random |
Random from 1 ~ 9 mode |
|
| |
| Trouble Shooting |
Problem |
Diagnosis and Analysis |
Solution |
Diodes not lighten up |
The wire on the wire terminal in bad connection |
Check solder on the wire to re-solder wire |
|
Poles are wrong connected to cause short circuit |
Switch poles |
Wrong Colors |
The wire not corresponding to the diodes or connection of the wire not good |
Check the wire to re-connect the power |
|
| |
| Controller Diagram & Pin Assignment |
 |
| |
| |
| Installation |
( 1.) The distance between controller and the power supplier or between LED modules should be no more
than 3 meters far.
( 2.) When choosing the power cord, please keep in mind that total current of the LED modules connected
to the power cord should not exceed the normal working current of the power cord to avoid any over
heat on the power cord to fail the controller and LED modules.
( 3.) Please make sure that the metal case of the power supplier is connected to the ground line. Power
supplier must be grounded to avoid any damage of serge.
( 4.) The waterproof and insulation treatment should be taken care at the last module of each reel or
cutting segment. Once the reel is cut segment by segment, the potting of cutting sides on the soft PCB
is not water proved.
( 5. )The controller and Power Supplier must work in the environment of good ventilation or cool air flow
and dry.
( 6.) The Gray output wire (V) of the controller should be connected to the gray common anode wire
(DC12V) of the controlled modules. While another three output wires of the Red/Green and Blue color
codes must be matched to the Red/Green/Blue pin assignment.
( 7.) Please confirm that no short circuit exists between input or output wires of the main line of the control.
Any wrong anodes of the positive pole and negative pole will cause the LED modules and Controller
burned out or fire.
( 8.) When the LED modules are under installation, please do not turn on the main power. The device is not
HOT PLUG.GED
( 9.) If the controller is not working, please do not open the case to repair the inside assembled PCB.
Device must be returned to the manufacture to repair. |
| |
|
| |
| TOP |
| |
Home